Leather is widely used in the passenger compartment of automobiles. The raw material of leather will be adjusted by adding additives when the trim materials used for automobiles are produced. Those additives are usually liable to volatile especially in an environment where the temperature is high. The volatile components of the leather may float in [...]
Floor mat is one very common car accessory, which is usually made of leather. The raw material of leather will be adjusted by adding additives when the floor mats are produced. Those additives including organic solvent, liming auxiliary agent, degreasing agent for leather, soaking auxiliary agent, preservative, mildewcide and surfactant, etc. are usually liable to [...]
Introduction The term “Fogging” refers to the film that collects on the inside of vehicle window glass. Of particular interest is the windshield, because this film can both limit light transmittal as well as refract the light that is transmitted, impairing visibility and creating safety concerns. A fogging test system is designed to determine the [...]
Materials used in vehicles, such as plastics, fabrics, rubber or leathers, will evaporate under high temperatures and condense on the windshield and create a fog, which causes dangerous driving conditions. Fogging test is right to measure fogging characteristics of these automotive interiors as well as HID lamps. FT-F1 Fogging Tester is professionally designed for the [...]
On 17th-20th May, 2011, the 25th International Exhibition on Plastics and Rubber Industries was held in Guangzhou. Labthink exhibited her newly developed X series of intelligent products, and demonstrated powerful functions of Labthink CystemTM Online Laboratory Management System, the new laboratory intelligence concept based on cloud-computing. All have obtained favorable responses and recognition, and Labthink [...]
LSSD-01 Leak and seal strength tester is applicable in car lighting leakage test, which produced by Labthink Instruments Co.,Ltd. It is the necessary equipment for auto companies and car lighting manufacturers. To inflate designated pressure compressed air into car light inside and test the amount of gas leak. Then you could evaluate leakage property of [...]
Fogging Tester is applicable in fogging test of automotives’ interior decoration materials, that will volatilize under higher temperature. Fogging tester can be used to test the fogging of the xenon lights. Fogging Tester conforms to standards of ISO 6452, DIN 75201 and SAE J1756 etc. FEATURES: 1. Fit for laboratory running and low noise 2. [...]
